Epson LQ-860 User Manual page 52

7. Slide the paper down between the edge guides until it meets
resistance and the PAPER OUT light goes off. After about two
seconds, the printer loads the paper automatically and is set
ON LINE so that it can accept data from your computer.
8. Close the paper guide cover.
WARNING: Never advance the paper using the platen
knob except in the case of a paper jam or other paper feed
problem. Using the platen knob while the printer is on
may damage the printer and affect the loading and short
tear-off positions.
Note: If the platen turns without loading the paper, press the
ON LINE button to take the printer off line and completely remove
the paper. Then re-insert the paper more firmly.
If you need to adjust the position of the paper after it is loaded, use
the micro-adjustment feature described in Adjusting the Loading
Position in Chapter 3.
2-6 Paper Handling