ESC \
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Determines the position (relative to the current position) at which
printing of subsequent data will start. To find
calculate the displacement required in dots. If the displacement is
to the left, subtract it from 65536. Send the resulting number
using this formula: total number of dots = nl + (256 x
command is ignored if it would move the print position outside
the current margins. A unit is 1/120th of an inch in draft, and
1/180th of an inch in Letter Quality or proportional modes.
Horizontal tabbing
H T
Format:
ASCII code:
Decimal:
H e x a d e c i m a l : 0 9
Comments:
Advances the print position to the next horizontal tab setting. The
default tabs are at S-character intervals in the currently set pitch.
Tab positions are not affected by subsequent changes in cpi.
9-22
Command Summary
ESC
\
27
92
1B
5C
HT
9
Set Relative Print Position
nl
n2
nl
n2
nl
n2
nl
and n2, first
The
n2).
Tab Horizontally