Epson LQ-860 User Manual page 89

Most application programs take care of top and bottom
Note:
margins. Use skip over perforation only if your program does not
provide these margins.
The skip over perforation setting can be set to values other than
one inch by using the ESC N command. See the Command
Summary in Chapter 9 for details.
Page length
To obtain one of the four page lengths, set DIP switches 2-1 and 2-2
according to the Page length selection table. The page lengths are:
8.5 inches (216 mm), 11 inches (279
12 inches (305 mm).
Page length selection
Page length
11 inches
12 inches
8.5 inches
11.7 inches
If you are using the cut sheet feeder, the page length is
Note:
automatically set when you run the printer's self test. For details,
see The Cut Sheet Feeder in Chapter 5.
Other page lengths can be set using the commands ESC C and
ESC C 0. See the Command Summary in Chapter 9 for details"
3-12
Using the Printer
SW 2-l SW 2-2
OFF OFF
ON OFF
OFF ON
ON ON
11.7 inches (296 mm), and
mm),