Epson LQ-860 User Manual page 64

3. Press the LOAD/EJECT button to feed the continuous paper
backward out of the printer and into the standby position. The
paper is still attached to the tractor but no longer in the paper
path. The PAPER OUT light comes on when the paper is
completely out of the paper path.
CAUTION: Pressing the LOAD/EJECT button once may not
feed the paper far back enough to reach the standby
position. If the PAPER OUT light does not come on, press
the LOAD/EJECT button again. With normal-width
continuous paper, you can press the LOAD/EJECT button up
to three times. If, however, you are using narrow paper
(between 4 and 6 inches or 101.6 and 152.4 mm), you can
press the LOAD/EJECT button only once. Also, do not use
this button to eject labels.
WARNING: Never feed labels backward through the
printer. Labels can easily come off the backing sheet and
jam the printer.
2-18 Paper Handling