6. Raise the continuous paper support on the paper path guide.
7. Press the ON LINE button. The printer loads continuous paper
and goes on line.
Note:
With the paper release lever forward and the printer off line,
l
the control panel functions normally, allowing you to use the
micro-adjustment feature to finely adjust the loading position
of your paper.
If you wish to use the short tear-off feature, you can tear off
l
the perforation of the continuous paper at the cut sheet
feeder's tear-off edge. See Chapter 3 for more information on
the short tear-off feature.
CAUTION:
sheet feeder is installed.
Using the Printer Options
5-18
Never attempt to print on labels when the cut