Epson LQ-860 User Manual page 229

Problem
Using the cut sheet
feeder, the paper
does not feed
properly
(continued).
After a print command
is sent from the
computer, the platen
rotates, but paper does
not feed. The PAPER
OUT light is on
(continued).
Two
or more sheets
feed at the same time.
Solution
The left and right paper guides may be
too close together, preventing smooth
paper feed. Adjust the position of the
paper guides so that the paper can move
up and down freely. Check the envelope
levers. They should be up for single sheets
and for envelopes. See Chapter 5.
down
Paper may be jammed near the print
head. Remove the paper jam (temporarily
remove the cut sheet feeder if necessary).
You may have loaded too many sheets in
the cut sheet feeder's bin. Remove the
sheets. The bin can hold up to 150 sheets.
There may be only one sheet left in the
bin. last sheet in the bin may not feed,
The
so add more paper.
You may have loaded too many sheets in
the cut sheet feeder's bin. Remove the
sheets. The bin can hold up to 150 sheets.
You may have forgotten to fan the stack
of paper before loading it into the bin.
Remove the paper and fan it. Then align
the edges of the stack. See Chapter 5.
Troubleshooting
7-29