Commands Arranged By Topic; Printer Operation - Epson LQ-860 User Manual

Commands Arranged by Topic

This following section lists and describes all the commands by topic.
See the Quick Reference card at the back of this book for a handy list
of commands by topic.

Printer Operation

Initialization
ESC @
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Resets the printer mode and clears the current print line
preceding the command. See Initialization in Chapter 8.
DC1
Format:
ASCII code:
Decimal:
H e x a d e c i m a l : 1 1
Comments:
Returns the printer to the selected state if it has been deselected
by the printer deselect code (DC3). It does not select the printer if
it has been switched off line by the ON LINE button.
DC1 and DC3 do not work if pin 36 on the parallel interface is
low (for example, on IBM PC and compatible computers).
ESC @
27 64
1B 40
DC1
17
Initialize Printer
Select Printer
Command Summary 9-9