Choosing A Character Table - Epson LQ-860 User Manual

Choosing a Character Table

DIP switch 1-4 selects either the italic character table or the Epson
Extended Graphics character table. The Epson Extended Graphics
character table contains international accented characters, Greek
characters, mathematic symbols, and character graphics for printing
lines, corners, and shaded
If you have an IBM@ or IBM-compatible computer, select the Epson
Extended Graphics table when you wish to print character graphics
as they are displayed on the screen. Even if you select Epson
Character Graphics, you can still print ordinary text and italics. For
italics, see the description of the ESC 4 command in the Command
Summary, Chapter 9.
Note: In most cases, Epson Extended Graphics
selection.
To select a character table, set DIP switch l-4 according to the table
below.
0 I
CAUTION:
.
off the printer, change the DIP switch, and then turn the
printer back on.
Sample printouts of the italic characters and the Epson Extended
Graphics characters are shown in the appendix.
3-28 Using the Printer
areas.
To change the setting of a DIP switch, first turn
the preferred
is