Setting Up Different Unix Systems Using The Lpr; Command - Epson EPL-N7000 Network Manual

Setting Up Different UNIX Systems Using the lpr

Command

The following UNIX systems can print using the standard lpr
command.
❏ SunSoft Solaris 2.4 or later
❏ SunOS 4.1.4 or later
❏ IBM AIX 3.2.5 or later and 4.1.3 or later
❏ HP-UX 9.05 or later
❏ SCO UNIX 4.2 or later
Setting up for SunSoft Solaris 2.4 or later
In the following steps, substitute the name that your printer will
be known by for HOSTNAME, and the name by which you want
your printer to be known for Rprinter.
1. Add the IP address and printer host name to the \etc\hosts
file.
For example:
22.33.44.55 HOSTNAME
2. Define the host name as a print server.
For example:
lpsystem -t bsd HOSTNAME
3. Create the printer.
For example:
lpadmin -p Rprinter -s HOSTNAME\aux-T unknown-1 any
128
How To