Windows Nt 4.0 - Epson EPL-N7000 Network Manual

2. Right-click the Local Area Connections icon and then select
Properties.
3. Check that Client for Microsoft Networks is in the
Components list. If it is not installed, click Install to install it.
4. Run the command prompt and enter the following command.
NET USE printer port: \\NetBIOS name of network
interface\Device name of network interface
Selecting the port
1. Click Start, point to Settings, and then select Printers.
2. Right-click the printer icon and then select Properties.
3. Click the Ports tab and then select the port you have set with
the NET USE command.

Windows NT 4.0

For Windows NT 4.0, the printer driver installation procedure
differs depending on the printing method you prefer. Epson
recommends printing with EpsonNet Print. See "For Windows
XP/Server 2003/2000/NT 4.0 Users" on page 177.
LPR printing
Note:
If you are using EpsonNet Print, the setup procedure is different. See
"About EpsonNet Print" on page 175 for details.
1. Click Start, point to Settings, and then select Printers.
2. Double-click the Add Printers icon.
78
How To