Windows Me/98 - Epson EPL-N7000 Network Manual

Selecting the port
1. Click Start, click Control Panel, click Printers and Other
Hardware, and then click Printers and Faxes.
2. Right-click the printer icon and then select Properties.
3. Click the Ports tab and then select the port you have set with
the NET USE command.

Windows Me/98

For Windows Me/98, the printer driver installation procedure
differs depending on the printing method you prefer. Epson
recommends printing with EpsonNet Print. See "For Windows
Me/98/95 Users" on page 186.
LPR printing
Since Windows Me/98 does not support LPR, standard TCP/IP
printing cannot be used. However, you can print via TCP/IP
using the EpsonNet Print utility included on the Software
CD-ROM. First, install EpsonNet Print. Then, install the printer
driver. See "About EpsonNet Print" on page 175 for more details.
Internet printing (Windows 98)
Internet printing is possible by using the EpsonNet Internet Print
utility included on the Network Utility CD-ROM. First, install
EpsonNet Internet Print. Then, install the printer driver and set
the printer port. See "About EpsonNet Internet Print" on page 195
for more details.
62
How To