Setting Up The Epl-N2000 With Other Unix Systems; Setting Up For Sco Unix Systems - Epson EPL-N2000 Network Administrator's Manual

Setting Up the EPL-N2000 with Other UNIX Systems

This section contains information and scripts for setting up the
EPL-N2000 with different types of UNIX.

Setting Up for SCO UNIX Systems

Some UNIX systems, such as SCO, do not support lpr. The two
scripts on the following pages allow you to print from within
some applications using ftp, which is supported on most
systems using TCP/IP. Both scripts have been tested for SCO
UNIX, but may require modification for other systems.
In SCO UNIX, the original printer model scripts are located in
the following directory:
/usr/spool/lp/model
If you use the SCO administration program (SYSADMSH) to
create a printer, these scripts are copied to the following
directory:
/usr/spool/lp/admins/lp/interfaces
You can place a script directly into your interface directory, or
you can enter the following:
/usr/lib/lpadmin-pPRINTER-v/dev/null-i/etc/
INTERFACESCRIPT
PRINTER is the printer name used in lpd printer, and
INTERFACESCRIPT is the file name containing the next ftp
script.
Configuring the EPL-N2000 for UNIX 5-9