Epson EPL-N7000 Network Manual page 190

The port
Information
Finish button
Back button
Cancel button
The printer is now ready for peer-to-peer printing. To configure
the printer port, see "Configuring the Printer Port" on page 193.
Adding a port for a printer assigned with a static IP address
Install the printer driver before adding a port for the printer. See
the manual shipped with your printer for instructions on how to
install the printer driver.
1. Click Start, point to Settings, and then select Printers.
2. Right-click the target printer icon, and then select Properties.
3. Click the Details tab, and then click the Add Port button.
Select the Other radio button, and then select EpsonNet Print
Port. Click OK.
190
Network Software
The following items are displayed:
- Port Name (If the port type is changed, the port
name and the host name or IP address are also
changed.)
- Printer Model
- Host Name or IP Address
- Protocol
Register the port information to the system and close
the Add EpsonNet Print Port Wizard.
Go back to the printer list window.
Close the Add EpsonNet Print Port Wizard.