Epson EPL-N7000 Network Manual page 113

❏ For Remote (rpinter on IPX) connection:
You need to use the same configuration of NetWare Remote
printer mode as you have set by using EpsonNet Config
already.
IPX Network Number: Enter the IPX network number of the
network interface.
IPX Node Number: Enter the IPX node number of the
network interface.
SAP Name: Enter the Primary Print Server Name. Do not use
the following characters: ~ ! @ # $ % ^ & * ( ) + ` = { } [ ] | \ : ;
" ' < , >. ? / `
Printer Number: Enter the printer port number (from 0 to
254).
❏ For Remote (LPR on IP) connection:
IP Address: Enter the IP address of the network interface. You
can confirm the IP address on the network status sheet.
❏ For Queue Based connection:
NDS Context: Type the NDS context.
Print Server Name: Print server name that is already defined
in NDS or Bindery. If the printer is in the Remote Printer
mode, enter the print server name that is used when
PSERVER.NLM is loaded.
Printer Name: Printer name that is already defined in NDS
or Bindery.
NDS Volume for Print Queue: The format is as follows:
Format: NDS Volume and context
For example: NDPS_SERVER_SYS.EPSON
File Server for Print Queue: Enter the file server name for the
print queue.
IPX Network Number: Enter the IPX network number of the
network interface.
IPX Node Number: Enter the IPX node number of the
network interface.
6. When you finish filling in the boxes, press Finish. Follow the
on-screen instructions.
113
How To
2
2
2
2
2
2
2
2
2
2
2
2