Chapter 1 Introduction; About Your Printer - Epson EPL-N7000 Network Manual

Chapter 1
Introduction

About Your Printer

Your printer has a built-in Ethernet interface and can connect
anywhere on your network using 10Base-T or 100Base-TX. The
built-in Ethernet interface, which is called the network interface
in this manual, automatically selects the correct standard when it
connects to a network. In addition, it supports and automatically
selects the IEEE 802.2, IEEE 802.3, Ethernet II, and Ethernet SNAP
network protocols.
Because the network interface supports multiple protocols and
automatically detects protocols on your network, you can print
from Microsoft
®
IBM OS/2 applications.
Use the Network Utility CD-ROM to easily configure the network
interface for use on the TCP/IP network and install the printer
driver. You can use the printer on the TCP/IP network at once.
If you want to configure the network interface for protocols such
as TCP/IP, NetWare, NetBEUI, AppleTalk
EpsonNet Config, the configuration utility provided with your
product, to quickly and easily configure the network interface to
use those protocols.
Note:
❏ The EpsonNet Config utility configures the network interface to
work only with protocols that exist on your network. This does not
imply that you can use all of the above-mentioned protocols on your
network or operating system. The protocols that the network
interface can use may vary depending on the operating system and
the network configuration.
8
Introduction
® ®
Windows , Apple
® ®
Macintosh , UNIX
®
, IPP, and SNMP, use
®
, and