Epson EPL-N7000 Network Manual page 148

10. Select Enable for Register Network Interface Address to
DNS Server if you want to register the host name and domain
name to the DNS server through the DHCP server that
supports Dynamic DNS.
If you want to register the host name and the domain name
directly to the DNS server, select Enable for Register
Network Interface Address Directly to DNS Server.
11. Select Enable or Disable for Use Universal Plug and Play.
Select Enable if you want to use the Universal Plug and Play
function on Windows Me or future operating systems.
12. Change the default Universal Plug and Play device name, if
desired. This device name is used for Windows that supports
the Universal Plug and Play function.
13. Mac OS X only:
Select Enable or Disable for Use Rendezvous. If you select
Enable, enter the Rendezvous Name and the Rendezvous
Printer Name. If your network environment supports DHCP,
you can use the printer on the network just by enabling this
setting.
14. Click Submit and then enter the password to update the
settings. See "Password" on page 174 for more information
on setting the password.
Note:
If you have set the Administrator Name on the Administrator
screen, enter the administrator name for the user name.
15. If the message "Configuration change is complete!" appears
on your screen, the update is complete. Do not exit the Web
browser and do not send a job to the printer until this message
appears. Follow the on-screen instructions to reset the printer.
148
Network Software