Epson EPL-N7000 Network Manual page 145

❏ TCP/IP must be correctly set for the computer and the network
interface.
❏ Do not run both EpsonNet Config for Windows or Macintosh and
Web-based EpsonNet Config at the same time.
❏ Your browser may restrict some characters you can use. For details,
see your browser or operating system documentation.
Note for users of printers supporting NetWare queue-based
printing:
If you are using the dial-up environment without running NetWare,
select Disable on the NetWare screen. If Enable is selected, the extra
account may be charged when you are using the dial-up router.
Follow the steps below to change the IP address using EpsonNet
Config.
1. Turn on your printer.
2. Run EpsonNet Config using one of the following ways.
❏ Run EpsonNet Config for Windows or Macintosh. Select
the printer you want to configure from the list and then
click Launch Browser.
❏ Open your browser, and then type in the IP address of the
network interface directly. Do not run EpsonNet Config
for Windows or Macintosh.
http://IP address of network interface/
Example: http://192.168.100.201/
Note:
To check the IP address of the network interface, use EpsonNet
Config. See "About EpsonNet Config" on page 135 for Windows
users, or see "About EpsonNet Config" on page 140 for Macintosh
users for details.
Network Software
3
3
3
3
3
3
3
3
3
3
3
3
145