Resetting The Toner And The Photoconductor Counters - Epson EPL-6100 Reference Manual

Different printer settings overlay data
The overlay data is made with the current printer settings such as
Resolution: 600 dpi. If you want to make the same overlay with
different printer settings such as 1200 dpi, follow the instructions
below.
1. Re-access the printer driver as described in step 2 in "Creating
an overlay" on page 34.
2. Make the printer settings and exit the printer driver.
3. Send the same data that you made by application to the
printer as in step 12 in "Creating an overlay" on page 34.
This setting is available only for Form Name data.
Resetting the toner and the photoconductor
counters
After replacing a developer cartridge or a photoconductor unit,
reset the toner counter or the photoconductor counter. You can
reset these counters from the printer driver or the control panel.
When you have installed a photoconductor unit, see "Resetting
the photoconductor counter" on page 40. When you have
installed a developer cartridge, see "Resetting the toner counter"
on page 38.
Resetting the toner counter
1. Click the Optional Settings tab, and then click Printer Setting.
The Printer Setting dialog box appears.
38 Using the Printer Driver with Windows