Epson EPL-6100 Reference Manual page 246

1. Turn on the computer and start Windows.
2. Insert the CD-ROM or floppy disk containing the EPSON
BarCode Fonts into the appropriate drive.
3. Click Start, point to Settings, then click Control Panel.
4. Double-click Fonts.
5. From the File menu, select Install New Font.
6. Select the appropriate CD-ROM or floppy drive, then select
the BarCode Fonts folder from the Folders list.
7. In the List of fonts box, select the BarCode Font you want to
install, or click Select All to install all EPSON BarCode Fonts.
Note:
Make sure that the Copy fonts to Fonts folder check box is selected.
8. Click OK. The selected EPSON BarCode Fonts are installed in
the Windows Fonts folder.
144 Working with Fonts