4. Gently wipe the rubber part of the paper roller with a
well-wrung cloth.
c
5. Reinstall the photoconductor unit, and then the developer
cartridge as described in "Replacing the Developer
Cartridge" on page 73 and "Replacing the Photoconductor
Unit" on page 80.
6. Close the printer cover until it clicks shut.
Cleaning the printer case
If the printer's outer case is dirty or dusty, turn off the printer and
clean it with a soft, clean cloth dampened with a mild detergent.
90
Cleaning and Transporting
Caution:
Do not touch the transfer roller to avoid the degradation of
the print quality.
1
2