Control panel: Ready light flashing (flashes at longer intervals
than the usual flashing)
Indicates that the printer is in energy-saving mode. The printer
goes into standby due to inactivity. If Standby is enabled, the
printer goes into standby in 15 minutes.
Warming Up
Control panel: Ready light flashing
Indicates that the printer is warming up to process and print data.
Printing a Status Sheet
To confirm the current status of the printer, print a status sheet
from the control panel. The status sheet contains information
about the printer, the current settings, and the installed options,
if any.
Press the @ Information button on the control panel. The Data light
flashes and the printer starts printing a status sheet.
Note:
If information about the installed options is not listed on the status
sheet, make sure that the options are installed correctly.
If you cannot print a proper status sheet, contact your dealer.
104
Troubleshooting