Select the emulation mode you want to configure and click OK.
The main Remote Control Panel screen that appears varies
slightly, depending on the emulation mode you select. The
example below is that for the LaserJet4 emulation mode.
Making basic printer settings
The settings presented in this section are also available in the
printer driver. Most application programs give you access to the
printer driver from within the application itself. You should
always try to change basic printer settings from within the
application program or by accessing the printer driver directly
from the operating system.
Settings made in the application program or in the printer driver
override those settings made in the Remote Control Panel utility.
However, if you cannot access the printer driver, or if you are
running DOS, then make these settings through this utility.
38
Using the Remote Control Panel Utility