Epson EPL-6100 Reference Manual page 225

Completely blank pages
Cause
There may be no toner in the
developer cartridge.
The developer cartridge is not
installed correctly.
The problem may be with your
application software or
interface cable.
The printed image is light or faint
Cause
Your paper may be moist or
damp.
The Toner Save mode may be
on.
What to do
If the toner status in the EPSON Status
Monitor 3 utility indicates that the
amount of toner is low, see "Replacing
the Developer Cartridge" on page 73 for
information on replacing the developer
cartridge.
Check that the developer cartridge is
installed as described under "Replacing
the Developer Cartridge" on page 73.
Print out a status sheet through the
printer driver. If blank pages continue
to appear, the problem may be with the
printer. Turn off the printer and contact
your dealer.
What to do
The higher the moisture content in the
paper, the lighter the printed output. Do
not store paper in a humid or damp
environment.
Turn off the Toner Save mode using the
printer driver.
Troubleshooting
10
10
10
10
10
10
10
10
10
10
10
10
123