Installing The Photoconductor Unit And Waste Toner Collector - Epson AcuLaser C2000 Setup Manual

8. Close the front cover.
Installing the Photoconductor Unit and Waste
Toner Collector
Before installing the photoconductor unit and the waste toner
collector, read the following handling precautions:
When installing the photoconductor unit, avoid exposing it
to room light any longer than necessary.
Be sure not to scratch the surface of the drum. Also, avoid
touching the drum, since oil from your skin may permanently
damage its surface and affect print quality.
Keep the photoconductor unit and waste toner collector out
of the reach of children.
Follow these steps to install the photoconductor unit and the
waste toner collector:
12
Assembling the Printer