Installing The Photoconductor Unit And Waste Toner Collector - Epson Aculaser C2000 Setup Manual

Installing the Photoconductor Unit and Waste
Toner Collector
Handling precautions:
When installing the photoconductor unit, avoid exposing it
to room light any longer than necessary. The unit contains a
light-sensitive drum. Exposure to light can damage the drum,
causing dark or light areas to appear on printouts and
reducing the service life of the drum. If you need to keep the
unit out of the printer for long periods, cover it with an opaque
cloth.
To get the best print quality, do not store the photoconductor
unit in an area subject to direct sunlight, dust, salty air, or
corrosive gases (such as ammonia). Avoid locations subject to
extreme or rapid changes in temperature or humidity.
Keep the photoconductor unit and waste toner collector out
of the reach of children.
1. While keeping the transfer belt unit in place with your left
hand, pull the ring toward you to remove the tension release
rod.
transfer belt unit
Assembling the Printer
18