Connecting Your Camera Directly - Epson Stylus Photo RX700 Basics Manual

Connecting Your Camera Directly

PictBridge and USB Direct Print let you print your photos by connecting your
digital camera directly to the Stylus Photo RX700.
Make sure your photos meet these requirements:
■
JPEG files or uncompressed Tiff files only
■
Resolutions ranging from 120 × 120 to 4600 × 4600 pixels
■
No more than 999 photos on your camera (you can have additional photos,
but the printer can read only the first 999)
1. Remove any memory cards from the RX700. (If you leave a card in the
RX700, photos will be read from that card instead of the card in your camera.)
2. Connect the USB cable that came with your camera to the
the front of the Stylus Photo RX700.
EXT. I/F port
3. If necessary, turn on the Stylus Photo RX700 and your camera. After a
moment, the RX700 reads and counts your photos.
4. Load the type of paper you want to print on (see page 31).
5. Press the
Setup
6. Use the d button to highlight
(depending on how your camera is enabled), then press
Setup
7. Use the RX700 screen to select default print settings, such as
, and
Paper Size
button.
PictBridge Setup
. You may have to scroll down to see all the settings.
Quality
or
Direct Print Document
Connecting Your Camera Directly
port on
EXT. I/F
.
OK
,
Paper Type
41