Epson Stylus Photo RX700 Basics Manual page 53

5. Click . The confirmation pattern is printed on
Print
the position check disk or CD.
6. Remove the position check disk or CD and measure
the distance from the edge of the hole to the small
cross marks (distances labeled A and B as shown).
You'll need a metric ruler with millimeters for these
measurements.
7. Open the File menu and select
this:
Windows
Enter measurements here
8. Make sure
Enter Values
Input the A distance in the
distance in the
9. Click to save the measurements.
OK
Adjust Print Position
(Windows) or
Height (Top)
or
Width (Right)
Macintosh
Value Entry
or
Top Space
box.
Right Space
. You see a screen like
Enter measurements here
(Macintosh) is checked.
box. Enter the B
Using EPSON Print CD
53