Epson Stylus Photo RX700 Basics Manual page 64

4. Press the
5. Use the u and d buttons to choose
button.
OK
6. Select the film type you've loaded. If you're scanning slides, select
If you're scanning a film strip, select one of these options:
■
Color negative film
■
B&W negative
■
Positive color film (strip)
Press
OK
The RX700 previews your photos on its screen:
7. Use the l and r arrow buttons to highlight each photo. While a photo is
highlighted, use the
appears in the box for each selected photo.
8. When you're done selecting photos, press
9. Choose
Normal
option.
10. Press the x
folder on your memory card.
11. When scanning is finished, you see a confirmation screen. Note the name
given to your image and its location on the card.
Caution:
Do not remove the card or turn off the Stylus Photo RX700 while the memory card light
is flashing, or you may lose data.
64
Scanning to a Memory Card
Slides Negatives
(used in most cases)
after making your selection.
and
+ –
(for good quality) or
button. Your photos are scanned and saved to the "epscan"
Color
button.
Scan to Memory Card
buttons to select it for scanning. A check mark
.
OK
(for best quality) as the Quality
Photo
, then press the
.
Color slide