You see misaligned vertical lines in your printout.
■
Align the print head; see page 74 for instructions.
Your printout is faint or has gaps.
■
Clean the print head; see page 72 for instructions.
■
The ink cartridges may be old or low on ink; see page 69.
■
Make sure you haven't selected
■
If you're printing with Epson paper, load it face-up in the rear sheet feeder.
Your printout is grainy.
■
Use Epson paper for best results.
■
Use the control panel buttons to select
setting. If you're printing from your computer, select a higher Quality Type or
Print Quality in your printer software.
■
If you're printing from a scanned image, rescan it at a higher resolution, or try
printing it at a smaller size.
You see wrong or missing colors.
■
Clean the print head; see page 72 for instructions.
■
The ink cartridges may be old or low on ink; see page 69.
■
Select the correct paper type setting for the paper you loaded (see page 32).
■
If the RX700 runs out of paper during a print job, load additional sheets as
soon as possible, or the colors of your next copy may be incorrect.
■
If you're printing photos from a digital camera, check the
settings to make sure they're the ones you want to use (see page 36).
Filter
■
If you're printing from a computer, make sure
ink is selected (Macintosh), even when you're printing black and white
Color
photographs.
■
Your printed colors can never exactly match your computer's on-screen colors.
However, you can use a color management system, such as ICM or
®
ColorSync
, to get as close as possible.
as the Quality setting.
Draft
or
Photo
Grayscale
as the quality
Best Photo
Auto Correct
is off (Windows) or
Problems and Solutions
and
79