Epson Stylus Photo RX700 Basics Manual page 23

5. On the next screen, use the u, d, l, r arrow buttons to select basic print
settings. Press
■
Paper Type
(see page 31).
■
Paper Size
■
: If you want to print without white borders around the edges,
Layout
choose
Borderless
■
Restoration
(see page 25).
Note:
Borderless printing is available only for Epson photo papers in these sizes:
4 × 6-inch, 5 × 7-inch, 8 × 10-inch, and letter-size.
Whether you print with or without borders, your photos will be slightly cropped
because 35-mm film has different proportions than those of the paper you're
printing on.
6. If you would like change the print quality or color saturation, press the
button. Change any settings as needed, then press
Options
7. Select the film type you've loaded. If you're scanning slides, select
If you're scanning a film strip, select one of these options:
■
Color negative film
■
B&W negative
■
Positive color film (strip)
Press after making your selection.
OK
The RX700 scans your photos and displays the first one on its screen:
8. Use the l and r arrow buttons to preview each of your photos.
9. While a photo is displayed, use the
of it you'd like.
when done making your settings.
OK
: Select the setting for the type of paper you've loaded
: Select the size of paper you've loaded.
. Otherwise choose
: Turn on to restore color to faded slides or negatives
(used in most cases)
with Border
and buttons to select how many copies
+ –
Making Prints From Slides or Negatives
.
.
OK
Color slide
.
23