Cropping A Photo - Epson Stylus Photo RX700 Basics Manual

8. When you have finished selecting your print settings, press
9. Use your camera to select the photos you want to print, adjust any necessary
settings, and print your photos. See your camera's manual for details.
Note:
Be sure to make the desired print settings on your camera, because its settings
generally take precedence over those on the RX700. If your camera is not
compatible with PictBridge or USB Direct Print, you'll see a message saying that
the connected device cannot be used. Epson cannot guarantee the compatibility of
any cameras.

Cropping a Photo

If you have a photo with a subject in it you want to emphasize, you can crop out
the rest of the photo. Then you can print just the main subject by itself.
Note:
You can crop and print only one photo at a time. Cropping does not change the original
file on your memory card; it changes only the way the photo is printed.
1. Load the type of paper you want to print with in the rear sheet feeder (see
page 31).
2. Press the
3. Select
Custom Print
4. Select
Crop
5. Adjust the print settings for the type of paper you've loaded and your desired
layout, then press
6. Use the l and r buttons to select the photo you want to crop, then press
You see the cropping screen:
42
Making Prints From Your Digital Camera
button.
Memory Card
then press
then press .
OK
(see page 30).
OK
.
OK
.
OK
OK
.