Scanning Film Or Slides - Epson Stylus Photo RX700 Basics Manual

5. Use the u and d buttons to choose
6. Use the u, d, l, and r buttons to select the following options:
■
Scan Area
color, select
■
Document Type
■
: select
Quality
file size).
7. Press the x
Color
folder on your memory card.
8. When scanning is finished, you see a confirmation screen. Note the name
given to your image and its location on the card.
Caution:
Do not remove the card or turn off the Stylus Photo RX700 while the memory card light
is flashing, or you may lose data.

Scanning Film or Slides

After inserting a memory card (see page 61), you can scan film or slides to the card
and save your photos in JPEG format. Follow these steps:
1. Open the scanner lid and remove the document mat (see page 19). Then
remove the film holder, if you've stored it under the document mat.
2. Place your film or slides in the holder, as described in these sections:
■
"Placing 35-mm Slides in the Holder" on page 20
■
"Placing 35-mm Film Strips in the Holder" on page 21
3. Close the scanner lid.
: select
Auto cropping (
Max area)
: select
Graphics
Text and Image
button. The photo is scanned and saved to the "epscan"
Scan to Memory Card
if the edges of the photo are light in
(for best quality) or
Scanning Film or Slides
, then press
OK
(for smaller
Normal
.
63