Other Ways To View And Select Your Photos - Epson Stylus Photo RX700 Basics Manual

Other Ways to View and Select Your Photos

When previewing your photos, you can choose whether to view them one-at-a-
time or nine per screen. You can also select photos for printing one-by-one, in a
range, or all at once. If your digital camera supports DPOF, you can use it to make
your selections beforehand.
1. After making your print settings (page 30),
you see the first photo on your card. Press
the
Screen View
displayed nine per screen.
Note:
Press the Screen View button again to view
your images as a slide show. (You cannot select
the number of prints in this mode.) Press
Screen View again to return to viewing one
photo per screen.
2. To select photos one-by-one, use the u, d, l, r arrow buttons to select each
photo, and the
done making your selections. Continue with step 8.
3. To select a range of photos, press the
4. Highlight
Note:
You can also select or deselect all the photos on the card. When selecting a range
of photos, it is helpful to view them nine per screen.
5. Move the highlight box to the first photo in the range of photos you want to
print, then press
additional adjacent photos. Press
6. By default, each photo in the range is set to print one copy. If you wish to
make additional copies of any photo, highlight it and use the
to select the number of copies.
34
Making Prints From Your Digital Camera
button. Your photos are
and buttons to select the number of copies. Press
+ –
, then press
Select Range
. Then use the u, d, l, r arrow buttons to highlight
OK
button. You see this screen:
Options
.
OK
when done.
OK
when
OK
and buttons
+ –