Memory Locations and Replacement Procedures
Figure B-1
Mode Switch Location on 7H4382-25
À
1 Mode switch bank
Memory Locations and Replacement Procedures
In the event that the Dual In‐line Memory Module (DIMM) or DRAM Single In‐line
Memory Module (SIMM) (FLASH memory) needs to be replaced, the following sections
describe how to access, locate and replace these memory modules. If you have questions
concerning the replacement of either memory module, refer to "Getting Help" on
page xviii for details on how to contact Enterasys Networks.
Location of DIMM and DRAM SIMM Memory Modules
Figure
B‐2 shows the locations of the DIMM and DRAM SIMM on the main board.
DFE-Platinum Series Hardware Installation Guide B-3