Memory Replacement Procedures; Dimm Replacement Procedure; Dimm And Dram Simm Locations - Enterasys Matrix 7G4280-19 Hardware Installation Manual

Memory Replacement Procedures

Figure B-2
1 DIMM
Memory Replacement Procedures
To replace the DIMM, proceed to "DIMM Replacement Procedure" on page B‐4. For
instructions to replace the DRAM SIMM, proceed to "DRAM SIMM Replacement
Procedure" on page B‐7.
If you have questions concerning the replacement of memory, refer to "Getting Help" on
page xviii for details on how to contact Enterasys Networks.

DIMM Replacement Procedure

Before you can replace the DIMM, you must gain access to it by removing the network
expansion module (NEM), as described in the following section.
B-4 Mode Switch Settings and Installing Options

DIMM and DRAM SIMM Locations

2 DRAM SIMM
Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive
electronic equipment.
Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones
de seguridad para evitar descargas de electricidad estática.
Á
À
3 Main PC board
Â