Redundant Power Supply Specifications
STK-RPS-150PS Specifications
Table A-5
Table A-5 STK-RPS-150PS Specifications
Item
Electrical
AC Input Frequency Range
AC Input Voltage Range
Output Voltage
Output Current
Maximum Output Power
Physical
Dimensions
Net Weight (Unit Only)
Gross Weight (Packaged Unit)
MTBF
STK-RPS-150PS Redundant Power Supply Connector
For pin location and function, refer to
Figure A-1
1
Pin 1
A-4 Specifications
provides the specifications for the STK-RPS-150PS.
Note: The following information is for troubleshooting purposes only. For proper operation, do not
use any other cable except the RPS cable supplied with the STK-RPS-150PS. This cable is
specially designed for this application and meets all necessary regulatory and safety standards.
The use of non-approved cables will void your warranty.
STK-RPS-150PS Power Supply Connector Pin Locations
2
Pin 7
Specification
47–63 Hz
85–264 Vac
12 Vdc
1.0 A min., 8.5 A or 13.0 A max.
102 W or 156 W continuous
19.6 H x 5.2 W x 25.7 D (cm)
7.7 H x 2.04 W x 10.1 D (in.)
1.75 kg (3.85 lb)
3.20 kg (7.04 lb)
300,000 Hours
Figure A-1
and
Table
A-6, respectively.
3
Pin 8
4
Pin 14