STK-RPS-500PS Specifications
Table A-5
provides the specifications for the STK-RPS-500PS.
Table A-5 STK-RPS-500PS Specifications
Item
Electrical
AC Input Frequency Range
AC Input Voltage Range
AC Input Current
DC Output
Maximum Output Power
Physical
Dimensions
Net Weight (unit only)
Gross Weight (1 unit and packaging)
MTBF
Environmental
Operating Temperature
Storage Temperature
Operating Relative Humidity
STK-RPS-150PS Redundant Power Supply Connector
For pin location and function, refer to
Note: The following information is for troubleshooting purposes only. For proper operation, do not
use any other cable except the RPS cable supplied with the STK-RPS-150PS. This cable is
specially designed for this application and meets all necessary regulatory and safety standards.
The use of non-approved cables will void your warranty.
Figure A-1
1
Pin 1
STK-RPS-150PS Power Supply Connector Pin Locations
2
Pin 7
Specification
50–60 Hz
100–240 Vac
10 A maximum at 115 Vac, 60 Hz
5.0 A maximum at 230 Vac, 50 Hz
-55 Vdc, 7.5 A maximum
+12.0 Vdc, 1.0 A minimum, 10.5 maximum
500 W
4.45 H x 44.5 W x 16.5 D (cm)
1.75 H x 17.5 W x 6.5 D (in.)
3.47 kg (7.63 lb)
4.95 kg (10.89 lb)
589,644 Hours at 25°C (77°F)
0°C to 50°C (32°F to 122°F)
-30°C to 73°C (-22°F to 164°F)
5% to 95%
Figure A-1
and
Table
A-6, respectively.
3
Pin 8
Enterasys A4 Fast Ethernet Switch Hardware Installation Guide A-5
Redundant Power Supply Specifications
4
Pin 14