Positioning Of Hook & Loop Straps To Secure Power Supply (Edge Of Tray Shown); Securing A Power Supply To The Rack Mount Tray (Edge Of Tray Position Shown) - Enterasys D2G124-12 Hardware Installation Manual

Figure 2-6 Positioning of Hook & Loop Straps to Secure Power Supply (edge of tray
shown)
1 Top power supply mounting hole
2 Bottom power supply mounting hole
3 Hook & loop straps
2. Repeat step 1 on page 2‐6 with another hook & loop strap to secure the other side of the power
supply to the mounting tray. Final placement is shown in Figure
Figure 2-7

Securing a Power Supply to the Rack Mount Tray (edge of tray position shown)

1 Top power supply mounting hole
2 Bottom power supply mounting hole
3 Hook & loop straps
4 DC power cord
4 Outer set of bridge anchors
5 Inner set of bridge anchors
2‐7.
5 AC power cord
6 Outer set of bridge anchors
7 Inner set of bridge anchors
Enterasys D-Series Hardware Installation Guide 2-7
Mounting the Switch