Unpacking The D2 Switch; Shipped With The Switch; Optional Components - Enterasys D2G124-12 Hardware Installation Manual

Unpacking the D2 Switch

Unpacking the D2 Switch

Shipped With the Switch

Inspect the contents for any signs of physical damage. Contact Enterasys Networks if it is
damaged. Refer to "Getting Help" on page xvii for details. The contents of the package include:
• D2 switch
• RJ45 to DB9 adapter (for use with the RJ45 console port if necessary)
• Various documentation, including an optional policy license, if purchased
• One power supply module and AC cord
• Optional rubber feet (for using the switch as a freestanding device)

Optional Components

Optional components shipped separately from the D2 switch include the following:
• One or more additional power supply module(s) for redundancy, either D2‐PWR or
D2‐PWR‐POE
• D2‐HIPWR‐POE power combiner
• One of the following installation kits:
–
–
–
–
• Optional plastic cover (D2‐COVER‐W)
2-2 Installation
Note: Unpack the D2 switch components only as needed. Leave the components in their
respective shipping cartons until you are ready to install that component. Save all shipping
materials in the event that the switch has to be repacked.
Note: Both power supplies must be of the same type to support redundancy.
Rack mount installation kit (D2‐RMT)
Table mount installation kit (D2‐TBL‐MNT)
Wall mount installation kit (D2‐WALL‐MNT)
Metal lockbox wall mount installation kit (D2‐LOCKBOX)