Appendix A: Specifications; Switch Specifications; Regulatory Compliance; D2 Specifications - Enterasys D2G124-12 Hardware Installation Manual

This appendix provides information about the following:
For information about...

Switch Specifications

D2-HIPWR-POE Specifications

Power Supply Specifications

Torque Values
1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications
Console Port Pinout Assignments

Regulatory Compliance

Enterasys Networks reserves the right to change these specifications at any time without notice.
Switch Specifications
Table A‐1 provides the I/O ports, processors and memory, physical, and environmental
specifications for the D2G124‐12 and the D2G124‐12P.
Table A-1 D2 Specifications
Item
Ports
RJ45 ports 1 through 12
Combo SFP ports 11 and 12
Processors/Memory
Processor
Dynamic Random Access
Memory (DRAM)
FLASH Memory
Specification
Twelve 10BASE-T/100BASE-TX/1000BASE-T compliant ports with
auto-sensing and auto-negotiation via RJ45 connectors. On the
D2G124-12P, these ports also support 802.3af PoE connections.
Two ports that support optional Mini-GBICs 1000BASE-FX/LX/SX
fiber-optic connections and 1000BASE-T copper connections.
When an SFP transceiver (Mini-GBIC) in SFP port 11 establishes a link,
RJ45 port 11 is disabled. When an SFP transceiver in SFP port 12
establishes a link, RJ45 port 12 is disabled.
MPC8241, 266 MHz processor
256 MB
32 MB
Enterasys D-Series Hardware Installation Guide A-1
A
Specifications
Refer to page...
A-1
A-2
A-3
A-3
A-4
A-7
A-7