Table of Contents
Advertisement
•
your latitude (40°30.5223N) and longitude (120°23.1231E) and UTC time in 12 hour format
(12:15pm).
•
the name of the destination waypoint (FISHY), its bearing (138°), your distance in nautical miles,
mile, or kilometers (depending on your choice of units), and any cross track error (XTE) are
shown.
1.3 Beep tones & call alerts
Error
Acknowledge
Alarm
LL position call alert
WX alert / SAME alert
ROUTINE call alert
URGENCY call alert
SAFETY call alert
DISTRESS call alert
1.4 How to put the radio into MENU mode
You can customize many settings on the LVR-880 to suit your own preferences and enter and store
alphanumeric data (such as a buddy name), but you cannot do this while the radio is operational, you
must put the radio into MENU mode first.
1. Hold down CALL MENU for about 3 seconds to put the radio in MENU mode.
Note that only three menu items can be displayed at any one time on the LCD.
2. Press EXIT or PTT any time to quit MENU mode and return to operational mode.
1.5 How to Display and Navigate Menus
Hold down CALL MENU for about 3 seconds to put the radio in MENU mode.
To navigate through a menu:
1. Press + or – on the microphone OR turn the Channel Select knob on the base station to scroll up
or down through the menu until the cursor is positioned at the desired option.
2. Press ENT (the center of the Channel Select knob) to display that option.
1.6 How to Enter Alphanumeric Data
1. Hold down CALL MENU for about 3 seconds to put the radio in MENU mode.
2. For example, select BUDDY LIST then press ENT. Press ENT again for a new Buddy and enter
the alphanumeric name.
3. Press + or – on the microphone OR turn the Channel Select knob to step through alphanumeric
characters one at a time.
4. Press ENT (the center of the Channel Select knob) to confirm your choice or setting.
5. If you make an error, press – until < is displayed, then push the center of the Channel Select knob
to backup.
3 cycles of 3 beeps
1 long beep
6 beeps followed by a 2 second pause (cycle is repeated for 2
minutes or until any key is pressed)
??
Ear-catching multi-tone sequence
Friendly two-tone ring tone (press any key to cancel)
6 beeps followed by a 2 second pause (cycle is repeated for 2
minutes or until any key is pressed)
??
6 beeps followed by a 2 second pause (cycle is repeated for 2
minutes or until any key is pressed)
8
Advertisement
Table of Contents
