Table of Contents
Advertisement
4.1 Channel (UIC)
LVR-880US only.
Toggle between USA, International, or Canadian channel banks. The selected channel bank is
displayed on the LCD along with the last used channel. All the channel charts are shown in Appendix
C.
RADIO SETUP
>UIC
CH NAME
RING VOLUME
1. Select RADIO SETUP then UIC.
2. Select the desired channel bank then press ENT.
4.2 Channel Names (CH NAME)
The channel charts are listed in Appendix C with their default name tags. CH NAME gives you the
option to edit or delete the channel name tags displayed on the LCD.
In this example, the channel name tag PHONE-PORTOP associated with channel 87 is being
changed to CALL PORT OP.
RADIO SETUP
UIC
>CH NAME
RING VOLUME
SAVE CH NAME
CALL PORT OP
>YES
NO
1. Select RADIO SETUP then CH NAME.
Use the Channel Select knob OR + or - to step through the channel name tags until you see the
one you want to change.
2. Press ENT then select EDIT to edit the existing name tag.
Note: To delete the channel name, select DELETE and press ENT.
3. Input the new name over the existing name. It can be a maximum of 12 characters.
4. Press ENT (repeatedly is necessary) to display the YES/NO confirmation.
5. Press ENT to confirm the new channel name tag (or the deletion).
4.3 Ring Volume (RING VOLUME)
The radio sounds the friendly two-tone alert when it detects an incoming DSC call. You can change
the volume level.
RADIO SETUP
UIC
CH NAME
>RING VOLUME
UIC
>USA
INT'L
CANADA
87
CH NAME
PHONE-PORTOP
RING VOLUME
>HIGH
LOW
PHONE-PORTOP
>EDIT
DELETE
26
EDIT CH NAME
PHONE-PORTOP
Advertisement
Table of Contents
