Time Format Options (Time Format); Time Display Options (Time Disply) - Navico Lowrance LVR-880US Operation Instructions Manual

1. Work out the time difference between UTC and your local time.
2. Select GPS/DATA then SETTING.
3. Select TIME OFFSET to enter the difference between UTC and local time.
Use the Channel Select knob OR + or – to change the time. Half hour increments can be used
with a maximum offset of ±13 hours.
4. Press ENT when the local time is correct.
LOC is displayed after the time on the LCD as a reminder that local time is selected.
3.6.3

Time Format Options (TIME FORMAT)

Time can be shown in 12 or 24 hour format.
MENU SELECT
LOCAL/DIST
CONTRAST
>GPS/DATA
1. Select GPS/DATA then SETTING.
2. Select TIME FORMAT.
3. Select 12 or 24 hr as desired. In this example, 12 hour format has been selected and so the LCD
shows the AM or PM suffix.
3.6.4

Time Display Options (TIME DISPLY)

If your vessel position and time data are being updated through a GPS navigation receiver, you can
show or hide the time on the LCD.
MENU SELECT
LOCAL/DIST
CONTRAST
>GPS/DATA
GPS/DATA
MANUAL
>SETTING
GPS/DATA
MANUAL
>SETTING
SETTING
TIME OFFSET
>TIME FORMAT
TIME DISPLY
SETTING
TIME OFFSET
TIME FORMAT
>TIME DISPLY
22
TIME FORMAT
>12 Hr
24 Hr
06:56PM LOC
TIME DISPLY
ON
>OFF