Table of Contents
Advertisement
When a signal is received, scanning stops at that channel and BUSY appears on the LCD. If the signal
ceases for more than 5 seconds, the scan restarts. Press SCAN or PTT to stop at the current channel.
If you are in NAVIGATION mode or FM RADIO mode and want to scan the DSC channels while
staying in that mode, just hold down SCAN.
Note: SCAN functionality is limited in some European countries and, if ATIS mode is enabled, the 3CH
SCAN mode will be disabled and an error beep will sound.
Note: The weather channel is also scanned if TONE ALERT or SAME is ON (LVR-880US only).
ALL SCAN mode
Hold down SCAN for about 3 seconds to start an ALL SCAN. ALL SCAN appears on the LCD.
Press ENT to temporarily skip over (lock out) an "always busy" channel when in ALL SCAN mode. An
X is shown on the top line of the LCD to designate a skipped channel. The X will disappear when the
radio is powered OFF/ON. With scanning OFF and the X channel selected, press ENT to cancel the
skipped channel.
Note that it is not possible to skip over the priority channel.
Press SCAN to stop at the current channel.
3CH SCAN mode
With any of your three favorite channels selected (by pressing the 3CH key) hold down SCAN to start
all 3CH scanning.
Press SCAN again to stop at the broadcast channel OR press EXIT to quit 3CH SCAN and return
automatically to the previous broadcast channel.
2.19 SCAN (DUAL WATCH Mode)
Dual watch mode monitors the current working channel and the priority channel.
Press SCAN to start scanning in dual watch mode. DUAL WATCH appears on the LCD.
Press 16 OR 16/9 to listen to the priority channel.
Press SCAN again to quit scanning and return automatically to the previous broadcast channel.
Note: SCAN functionality is limited in some European countries and, if ATIS mode is enabled, 3CH
SCAN mode will be disabled and an error beep will sound.
2.20 SCAN (TRI WATCH Mode)
LVR-880US only.
Tri watch mode monitors the current working channel and both priority channels.
Press MENU and select RADIO SETUP. Select WATCH mode then 16CH + 9CH to start scanning in
Tri watch mode. TRI WATCH appears on the LCD.
Press 16/9 to listen to the priority channel.
Press SCAN again to quit scanning and return automatically to the previous broadcast channel.
2.21 WX
LVR-880US only.
Weather channel. In USA or Canadian waters, press WX to enter WEATHER mode and hear the
most recently selected weather station. The WX symbol is displayed on the LCD.
Rotate the dial or press + / - to change to a different weather channel.
Press WX again to return to the most recent channel.
If TONE ALERT is ON and an alert tone of 1050 Hz is broadcast from the weather station, the weather
alert is picked up automatically and the alarm sounds. Press any key to cancel the alarm and to hear
the weather alert voice message.
Note: If SAME is activatedand the 6 digit County IDs you want to monitor are entered, the radio will
sound the weather alarm ONLY when it is in WEATHER mode and detects a weather alert or weather
13
Advertisement
Table of Contents
