Enable Atis Functionality (Atis Select); Enable Dsc Functionality (Dsc Select); Response Type To Ll Polling Calls (Ll Reply) - Navico Lowrance LVR-880US Operation Instructions Manual

If you have already entered your ATIS MMSI, it is shown on the LCD.
2. If this is the first time that you are entering your ATIS MMSI, a dashed line appears. Enter your
ATIS MMSI along the dashed line. The first number is always 9. Press ENT to confirm each
correct entry and to move to the next digit.
If you make an error, press – until < appears then press ENT to backup and correct the entry.
3. Press ENT to store the ATIS MMS.
4. Enter your ATIS MMSI again as a password check, then press ENT to permanently store the ATIS
MMSI and return to the menu.
You can view your stored ATIS MMSI at any time by selecting ATIS MMSI in the main menu.

5.4 Enable ATIS Functionality (ATIS SELECT)

LVR-880EU only.
ATIS functionality will operate only after the ATIS MMSI has been entered (see previous section).
When ATIS functionality is enabled, the ATIS symbol is shown on the LCD.
DSC SETUP
GROUP SETUP
ATIS MMSI
>ATIS SELECT
1. Select DSC SETUP then ATIS SELECT.
2. Select OFF to disable ATIS functionality or ON to enable ATIS functionality.
3. Press ENT to confirm.
It is not possible to have both DSC ON and ATIS ON simultaneously. When you enable one, the other
will turn OFF. If DSC and ATIS are both OFF, DSC will have to be switched ON for normal DSC
operation.

5.5 Enable DSC Functionality (DSC SELECT)

DSC functionality will operate only after a valid USER MMSI has been entered.
When DSC functionality is selected, the DSC symbol is shown on the LCD.
DSC SETUP
ATIS MMSI
ATIS SELECT
>DSC SELECT
1. Select DSC SETUP then DSC SELECT.
2. Select OFF to disable DSC functionality or ON to enable DSC functionality.
Note: Disabling DSC functionality is not recommended.
3. Press ENT to confirm.
It is not possible to have both DSC ON and ATIS ON simultaneously. When you enable one, the other
will turn OFF. If DSC and ATIS are both OFF, DSC will have to be switched ON for normal DSC
operation.

5.6 Response Type to LL Polling Calls (LL REPLY)

You can set up the radio to respond to an LL polling request in one of three ways:
•
MANUAL – reply manually to any incoming LL polling requests from your buddies.
•
AUTO – automatically replies to any incoming LL polling requests from any of your buddies.
•
OFF - ignores all incoming buddy LL polling requests.
ATIS SELECT
>ON
OFF
DSC SELECT
ON
>OFF
INSERT
SCREENSHOT
INSERT
SCREENSHOT
34