Local Or Distance Sensitivity (Local/Dist); Set Distance Sensitivity; Set Local Sensitivity; Set The Contrast Level (Contrast) - Navico Lowrance LVR-880US Operation Instructions Manual

3. Select EDIT. The cursor is at the first character of the name.
Note: To delete the buddy, select DELETE then YES. The buddy is deleted immediately and the
buddy list is displayed again.
4. Edit the buddy name OR to edit only the MMSI, press ENT repeatedly until the cursor moves to
the MMSI line.
5. When you are finished, press ENT (repeatedly if necessary) until a new LCD appears.
6. Press ENT to store the changes. The buddy list is displayed again. If more changes are required,
repeat steps 2 through 6. Otherwise, press EXIT to ESC.

3.4 Local or Distance Sensitivity (LOCAL/DIST)

Use LOCAL/DIST to improve the sensitivity of the receiver either locally (LOCAL) or over distances
(DIST).
LOCAL is not recommended for use in open sea conditions. It is designed for use in areas of high
radio noise; for example, close to cities.
See also SQL (Squelch Control) in section 2.2.
3.4.1

Set Distance Sensitivity

MENU SELECT
BACKLIGHT
BUDDY LIST
>LOCAL/DIST
1. Select LOCAL/DIST then select DISTANT.
2. Press ENT to activate the DIST setting. This disables local sensitivity and the menu is displayed
again.
3.4.2

Set Local Sensitivity

MENU SELECT
BACKLIGHT
BUDDY LIST
>LOCAL/DIST
1. Select LOCAL/DIST then scroll to LOCAL.
2. Press ENT to activate the LOCAL setting. This disables distance sensitivity and the menu is
displayed again.
LOCAL is displayed on the LCD as a reminder that local sensitivity is selected.

3.5 Set the Contrast Level (CONTRAST)

There are 8 levels of contrast.
MENU SELECT
BUDDY LIST
LOCAL/DIST
>CONTRAST
1. Select CONTRAST.
SENSITIVITY
>DISTANT
LOCAL
SENSITIVITY
DISTANT
>LOCAL
CONTRAST
LO HI
■■■■
PRESS ENT
20