Send Waypoint Data To A Chartplotter; Edit Or Delete A Temporary Waypoint; Set The Backlighting Level (Backlight) - Navico Lowrance LVR-880US Operation Instructions Manual

TEMP WP FULL
DELETE TMP1?
>YES
NO
3.1.6

Send Waypoint Data to a Chartplotter

You can send waypoint data over NMEA2000 to a compatible chartplotter.
MENU SELECT
>WAYPOINT
BACKLIGHT
BUDDY LIST
5. Select WAYPOINT then TEMP. Your temporary waypoint list is displayed.
6. Select the temporary waypoint whose data you want to send to the chartplotter then press ENT.
7. Press ENT again to send the data.
3.1.7

Edit or Delete a Temporary Waypoint

MENU SELECT
>WAYPOINT
BACKLIGHT
BUDDY LIST
TEMP EDIT
TEMP2
18°46.243'N
160°125.341'E
1. Select WAYPOINT then TEMP. Your temporary waypoint list is displayed.
2. Select the temporary waypoint to edit then select TEMP EDIT.
Note: To delete the temporary waypoint, select DELETE then YES. The temporary waypoint is deleted
immediately and the temporary waypoint list is displayed again.
3. The waypoint details are displayed. The cursor is at the first character of the name.
4. Edit the temporary waypoint name OR to edit only the latitude or longitude, press ENT repeatedly
until the cursor moves to the required line.
5. When you are finished, press ENT (repeatedly if necessary) until a new LCD appears.
6. Press ENT to store the changes. The waypoint list is displayed again. If more changes are
required, repeat steps 2 through 6. Otherwise, press EXIT.

3.2 Set the Backlighting Level (BACKLIGHT)

There are 8 levels of backlight. Level 8 is the brightest.
MENU SELECT
WAYPOINT
>BACKLIGHT
BUDDY LIST
WAYPOINT
WP LIST
NEAREST WP
>TEMP
WAYPOINT
WP LIST
NEAREST WP
>TEMP
SAVE
NEW WP1
>YES
NO
BACKLIGHT
LO HI
■■■■■■
PRESS ENT
TEMP
TEMP1
>TEMP2
TEMP
TEMP1
>TEMP2
18
TEMP2
>GO
WP EDIT
TEMP2
GO
>TEMP EDIT
DELETE