Table of Contents
Advertisement
STARFISH
LL REQUEST
WAITING ACK
1. Select DSC CALL then LL REQUEST.
2. Select the buddy whose LL position you want to request and press ENT.
3. Press ENT again to SEND the request.
The working channel is displayed while the radio waits for an acknowledgement from your buddy. If
there is no reply after 30 seconds the radio asks if you want to retry. Press ENT if you want to retry.
6.14 Track a Buddy (TRACK BUDDY)
You can select a buddy to track; start and stop tracking your buddy, and add or remove buddies from
your buddy tracklist.
6.14.1
Start or Stop Tracking a Buddy (START TRACK)
Use TRACK START to track the position of a buddy on your TRACKLIST whose status is ON (see the
following section.) The buddy's position is updated at the interval you selected (f15, 30, or 60
minutes).
Note: START TRACK will track every buddy on your TRACKLIST whose status is ON.
DSC CALL
DIST LOG
LL REQUEST
>TRACK BUDDY
MERMAID IV
LL REQUEST
CALLING...
1. Select DSC CALL then TRACK BUDDY.
2. Select START TRACK.
3. The status of each buddy on your tracklist (ON or OFF) is displayed.
4. Check that the status of the buddy (or buddies) that you want to track is ON, then press ENT.
5. Select YES then press ENT to start tracking (in this example, MERMAID IV and SEASPRAY.)
An LL Request is sent to each buddy on CH70 and your radio waits for your buddy's LL position to
be displayed on the LCD. See Section 6.20 for more information.
(Select NO in the START TRACK page to STOP tracking your buddies.)
6.14.2
Select a Buddy to Track (SET BUDDY)
DSC CALL
DISTRESS LOG
LL REPLY
>TRACK BUDDY
1. Select DSC CALL then TRACK BUDDY.
2. Select SET BUDDY to show the status of each buddy on your tracklist (ON or OFF).
TRACK BUDDY
>START TRACK
SET BUDDY
TRACKLIST
SEASPRAY
LL REQUEST
CALLING...
TRACK BUDDY
START TRACK
>SET BUDDY
TRACKLIST
START TRACK
SEAROSE OFF
MERMAID ON
SEASPRA ON
SET BUDDY
SEAROSE OFF
>MERMAID OFF
41
START TRACK
>YES
NO
SET BUDDY
MERMAID IV
>ON
OFF
Advertisement
Table of Contents
