Table of Contents
Advertisement
2.14 MOB (Temporary Waypoint)
To mark your current position as a temporary waypoint, hold down MOB and release the key before
the 3 second countdown ends.
You will see the following sequence of LCDs:
Hold 3 Sec
For MOB
Release To
Save
The new temporary waypoint is shown in your waypoints list. Hold down MENU, press ENT, then
press ENT again to display the waypoints list (TEMP1, WP001, WP002).
You cannot store more than three temporary waypoints. If you store another temporary waypoint,
TEMP3 is overwritten with the new information.
2.15 EXIT
Quit a menu. Press to quit the current MENU option without making any changes and to return to the
previous menu.
Cancel a distress call. Hold down EXIT or press CH16 to cancel a Distress call or a Distress call
relay.
2.16 3CH
Three favorite channels. This works only when you have saved one or more favorite channels.
Press 3CH to go to CH1 (favorite channel 1).
Press to toggle between your favorite channels. The CH1, CH2, or CH3 symbol appears on the LCD
to show which favorite channel is selected.
To add a favorite channel for the first time, select that channel then hold 3CH to store it in the CH1
location. The CH1 symbol will appear on the LCD to confrm the channel has been stored.
Repeat the procedure to store two more favorite channels in the CH2 and CH3 locations respectively.
If you try and add another favorite channel, a warning message asks if you want to overwrite CH3.
Press ENT to confirm.
To delete a favorite channel, select that channel then hold down 3CH. A message asks if you want to
delete that favorite channel. Select YES then press ENT to delete it.
2.17 + / -
Channel Select and scroll through menus. (Located on the microphone.)
When in MENU mode:
•
press + or - to scroll the cursor through the MENU options.
When in operational mode:
•
press + to step UP a channel OR – to step DOWN a channel.
•
hold down + or – to step quickly through the channels.
2.18 SCAN (ALL SCAN & 3CH SCAN)
There are two SCAN modes you can use to find the broadcast channel:
•
ALL SCAN mode scans ALL channels in sequence AND checks the priority channel every 2
seconds.
•
3CH SCAN mode scans the favorite channels and CH16.
Hold 2 Sec
For MOB
Release To
Save
Hold 1 Sec
For MOB
Release To
Save
12
Advertisement
Table of Contents
