Table of Contents
Advertisement
1. Select GPS/DATA then SETTING.
2. Select TIME DISPLY.
3. Select ON (on) or OFF (off) as desired. In this example, OFF has been selected and the LCD no
longer shows the time.
Note: If the time display is set ON, course and speed data are NOT displayed on the LCD, irrespective
of the COG/SOG setting. See Section 3.6.6.
3.6.5
Position Display Options (LL DISPLY)
If your vessel position and time data are being updated through a GPS navigation receiver, you can
show or hide your vessel position on the LCD.
MENU SELECT
LOCAL/DIST
CONTRAST
>GPS/DATA
1. Select GPS/DATA then SETTING.
2. Select LL DISPLY.
3. Select ON (on) or OFF (off) as desired. In this example, OFF has been selected and the LCD no
longer shows the vessel position.
3.6.6
Course & Speed Display Options (COG/SOG)
If your vessel position and time data are being updated through a GPS navigation receiver, you can
show or hide your course over ground (COG) and speed over ground (SOG) data on the LCD.
MENU SELECT
LOCAL/DIST
CONTRAST
>GPS/DATA
1. Select GPS/DATA then SETTING.
2. Select COG/SOG.
3. Select ON (on) or OFF (off) as desired. In this example, ON has been selected and so the LCD
shows the bearing and speed.
Note: If TIME DISPLY is ON, the course and speed data are NOT displayed on the LCD, irrespective
of the COG/SOG setting. See Section 3.6.4.
3.6.7
GPS Alert (GPS ALERT)
If the GPS Alert is ON and the GPS navigation receiver is disconnected, the alarm sounds.
Note: The default setting is ON for the VHF 880EU and OFF for the VHF 880US.
MENU SELECT
LOCAL/DIST
CONTRAST
>GPS/DATA
1. Select GPS/DATA then SETTING.
2. Select GPS ALERT.
3. Select ON (on) or OFF (off) as desired.
GPS/DATA
MANUAL
>SETTING
GPS/DATA
MANUAL
>SETTING
GPS/DATA
MANUAL
>SETTING
SETTING
TIME FORMAT
TIME DISPLY
>LL DISPLY
SETTING
TIME DISPLY
LL DISPLY
>COG/SOG
SETTING
LL DISPLY
COG/SOG
>GPS ALERT
23
LL DISPLY
ON
>OFF
COG/SOG
>ON
OFF
GPS ALERT
>ON
OFF
Advertisement
Table of Contents
